Brateck Dock Bracket Install

  • Updated

Request:

Install adjustable dock bracket (Replacing old Docks and mounts)

 

Action:

 Install the adjustable dock bracket into the same location as the removed unit.
Secure USB-C dock to bracket.
Connect dock to tablet and get staff to test tablet. (Ensure charging and all connected devices work)

 

Equipment Required:

  • BWR supplied Brateck dock bracket. Link
  • 20mm half saddles, 2x per dock.
  • BWR supplied USB-C Dock
  • Screwdriver / Power drill driver.

 

Steps:
 

Find a suitable location under the desk. You will need 50mm clearance on 2 sides to tighten the bracket and for the cables.

The USB-C Cable should go toward the desk grommet hole.

 

Mount the back plate

 

 

 

Install the dock and the front plate.

Place the dock in and secure the front plate using the thumb knobs. 

Please ensure the top button is visible 

 

 

Feed the strap through the channel behind the back plate.

Secure the dock using a hook-and-loop strap or the strap & buckle. Tidy up the excess strap.

 

 

 

 

 

 

Using 20mm half saddles, secure the power supply

 

 
Connect dock to tablet and get staff to check that it's working for charging, barcode scanner, ethernet network icon, internet.  
Package old dock into box provided, contact store should have a connote in there email    

 

  • HP G6 models needs bottom cover removed to connect the power cable.